Finding a Great Linen Cupboard

Five Quick Tips for a Long-Lasting Canvas Trailer Canopy

Posted by on Aug 8th, 2016 in Uncategorized | Comments Off on Five Quick Tips for a Long-Lasting Canvas Trailer Canopy

A canvas canopy is often a great addition to your trailer because it serves different purposes. The canopy protects the roof of your trailer from natural elements such as water and harmful rays from the sun. In addition, when extended, the canvas canopy can increase the living space around your trailer. When you want the canopy to serve you for many years without damage, a little cleaning and maintenance regimen can go a long way. This article highlights some tips to extend the life of your trailer canvas canopy.

Understand the Fabric — Most canvas canopies are made from vinyl fabric, which has high waterproofing capability. However, the material can be prone to mildew buildup if exposed to high humidity, high temperatures, and poor ventilation. Avoid water condensation on the base of the canopy by keeping the canvas dry. If left wet, the condensation can combine with dust and dirt, leading to mildew. Understanding your fabric will help you prepare a proper cleaning regimen.

Cleaning the Fabric — Regular cleaning of the trailer canopy should be one of the steps to guarantee an extended life. Cleaning prevents stains, rot, mildew, and mold that can easily destroy the canvas. The cleaning regimen will depend on the type of fabric used to make the canopy. A simple mixture of water, bleach, and dish soap is effective in removing stubborn stains and mildew. For light cleaning to remove dust and dirt, use plain water and a sponge. If you are into natural products, go for a combo of baking soda and white vinegar. Rinse the canvas with a garden hose and then dry in the sun.

Draining Water from the Canopy — When setting up the canopy on the trailer, you should be mindful of the weather. During the rainy season, a canvas canopy can soak up gallons of water if not properly placed. Always install the canopy at an angle so that it can drain itself when it rains. Water accumulation can tear apart the canopy because of the excessive weight.

Protect Canopy from Ultra Violet (UV) Rays — Some trailer canopies are equipped with flexible aluminum wraps that shelter the canvas when not in use. This aluminum prevents excessive damage caused by UV rays. Although this type of canopy may be expensive, it may be worth the cost because it will survive the brunt of UV rays.

Stabilize the Canopy – Sometimes, you may opt to extend the canopy to enjoy the shed underneath it. However, when extended, a canvas canopy can be susceptible to strong winds. Therefore, you should purchase a stabilizer kit, which consists of spiral stakes that are hinged on the ground to secure the canopy. The stakes are attached to ropes using tension units that keep the ropes taut. DIY manuals on the internet can help you make your own stabilizer kit; thus, saving yourself some money.

Tips For Caring For Your Outdoor Wood Furniture

Posted by on Aug 2nd, 2016 in Uncategorized | Comments Off on Tips For Caring For Your Outdoor Wood Furniture

Having outdoor furniture that is made of wood allows you to have attractive furniture that is durable and provides warmth for your patio. However, it is also at risk of rot, mould, and various other forms of damage. Here are some tips for caring for and maintaining your outdoor wood furniture.

Keep the Furniture Protected

Many types of outdoor furniture can be left out even when it is going to rain or snow, but wood needs to be protected. Pay close attention to the weather forecast and cover the furniture when rain is expected. Any type of cover that will reflect water off of the wood will work just fine. When it is a heavy raining season or the winter when you don’t spend much time on the patio, consider moving the furniture into a shed or garage or inside your home.

Apply Oil to Teak Furniture

If you have teak furniture outdoors, it helps to have an additional layer of protection over the quality hardwood. Teak oil is good for both sealing the wood and keeping it from becoming discoloured or drying out. If you live in a dry environment, teak can quickly change colours when left out in the sun, but teak oil helps to slow down the discoloration. It also provides a layer of protection from stains and mould. As a hardwood, it will still change to a lighter shade of wood over time, so keep that in mind.

Clean the Furniture Carefully

There may come a time when you want to clean the wood furniture, but you don’t want to get it too wet. It is okay to use water and a soft-bristle brush. Just don’t soak the furniture and don’t leave it wet. After removing dirt and debris, make sure you take a soft and dry towel to dry off the wet spots as much as you can. Be careful about the cleaning products you use, trying to use just water or mild soap when needed. Avoid bleach and other harsh chemicals.

Remove Mould Swiftly

If your wood furniture gets wet or is left out in humid conditions, it might start to develop mould. If parts of the wood look like a darker shade, are becoming ashy, or have a bad odour, it probably has some mould on it. Make sure you gently remove the mould as soon as possible as this helps to save your furniture. Use a soft scrubbing brush and warm water to remove the mould, making sure to wear gloves.

Check out the site for more information.

The Trick with Wicker: How to Paint Wicker Furniture

Posted by on May 20th, 2016 in Uncategorized | Comments Off on The Trick with Wicker: How to Paint Wicker Furniture

Outdoor wicker furniture is a great addition to any garden or outdoor patio. It looks great and is very resilient. In fact, with the proper care, wicker furniture can last for many years. Of course, as time passes, your wicker furniture will start to look a little tired. A great way to revive old furniture is to paint it. Below is a guide to painting your wicker furniture 

Prepare Your Furniture

In order to ensure the paint has a smooth, clean and professional-looking finish, you need to carry out some pre-painting preparation. You should use a soft bristled brush to scrape away any flakes of old paint from the surface of the furniture. For any flakes which are in harder to reach spots, you should use a flat headed screwdriver. Although it can take some time to remove the old paint, it is the only way to ensure a great finish. You could also use a power washer to remove old paint. However, you shouldn’t use a power washer on furniture which is made of natural rattan, as it can be easily damaged by the force of the water.

Priming the Furniture

Priming the wicker furniture for painting is a two part process. First, you need to wash down the furniture using warm soapy water. This will help to remove any dust, grime and debris. After washing, you should wipe the furniture down using a clean cloth. The second step involves applying primer to the surface of the furniture. You should match the primer to the type of paint you are using and allow it to dry fully before moving on to the final step.

Painting Your Furniture

The paint you use on the furniture should be oil based. An oil base makes paint much more flexible, allowing it to move as the wicker pieces within the furniture move. You should use a medium or small brush to apply the paint, so you can reach into every nook, cranny and corner of the furniture. To protect yourself, you should wear a protective face mask and gloves while painting. You should also make sure you are in a well ventilated area. Once you have applied the paint, you should wait for it to fully dry before moving the furniture back into place.

Your wicker furniture should now look as good as new and be ready for many more years of use. If you have any concerns about the condition of your wicker furniture, you should contact a furniture specialist.

How Red Cedar Wardrobes Can Protect Your Clothing from Moths

Posted by on Jul 31st, 2015 in Uncategorized | Comments Off on How Red Cedar Wardrobes Can Protect Your Clothing from Moths

Pulling a prized shirt or a beautiful dress out of your wardrobe, cabinet or chest of drawers, only to find it riddled with moth holes, can pretty much ruin your day. Over the centuries, people have tried all kinds of repellents to keep this insects away from their clothing, from moth balls to lavender oil. However, if you choose the right materials to build your wardrobe, you may not have to resort to any kind of moth repellent—certain varieties of cedar wood have long been believed to repel moth invaders.

How does cedar repel moths?

Contrary to popular belief, it is the moth larva, rather than the adult moth, that likes to chew embarrassing holes in your underpants. With adult moths generally use plants for food, the larvae are capable of digesting a much wider variety of organic materials for food, including fabrics. Egg-laying female moths like to lay their eggs in a place that is dark, sheltered, and which has a ready supply of food for their young. With this in mind, your priority is repelling female moths, since the males are harmless and the immature moth larvae lack wings and are incapable of much in the way of movement.

Certain varieties of cedar achieve this with the natural oils they produce while alive, and which remains impregnated within their wood once felled and prepared for sale. The strong scent of this oil effectively masks the presence of your clothing to the female moths, who search for suitable laying locations with smell rather than sight.

What kinds of cedar repel moths?

There are many trees in the cedar family, and no two are equal. While many people think that any kind of cedar will do when it comes to making a moth-resistant cabinet, there are only two types of wood that you should be looking out for:

  • Western red cedar—Sometimes sold as Pacific red cedar or shinglewood, western red cedar naturally holds a pungent, distinctively-scented oil within the pores of its wood. This wood has long been used to keep moths away from valuable fabrics, and the oil is often extracted and applied to other woods. It has little effect on moth larvae that manage to get inside your cabinets.
  • Aromatic red cedar—Also known as Eastern red cedar or pencil cedar, this wood contains a similar oil to the Western red cedar. However, this oil has more deadly qualities, and in a well-built cabinet with low air circulation it can actually kill moth larvae. Since the aromatic red cedar is actually a juniper species rather than a ‘true’ cedar, it generally grows much smaller, so this wood is often used as a veneer. Be aware that the moth-repellent oils in this wood are not as concentrated as they are in western red cedar, and will evaporate away after several years.

You may be tempted to choose the native option and opt for native Australian red cedar—don’t. Not only is the Australian red cedar ineffective at repelling moths, it actually produces a scent that attracts the cedar tip moth. This moth is a powerful burrower, and is capable of damaging both your clothing and the wood itself. Learn more about your options by contacting companies like Pinoy Cabinets.

Three Steps to Becoming a Cabinet Maker

Posted by on Jul 23rd, 2015 in Uncategorized | Comments Off on Three Steps to Becoming a Cabinet Maker

Being a cabinet maker is a great skilled trade to get into. Cabinet makers will learn a variety of skills. The cabinet maker will learn about the different types of wood used and what they are best suited for. They will also learn to assemble cabinets and install them.

The cabinet maker will need to be able to interact with customers and at times be a good salesperson. Here are three steps to becoming a cabinet maker:


The oldest way in the book to learn a trade is to be an apprentice and work under a master tradesman. Anyone interested in becoming a cabinet maker should enjoy doing manual work. They should have a good eye for detail and an appreciation of producing a high quality product. While working as an apprentice the future cabinet maker will learn to read specifications and follow the written directions perfectly to produce the cabinet required.

The apprentice will work directly under the master cabinet maker and learn all tools of the trade. Some of the skills learned will be cutting the wood with a myriad of tools, trimming and gluing joints and attaching hinges so the cabinet can open and close. The apprentice cabinet maker will learn to install cabinets. Another useful skill the master cabinet maker will teach is how to repair old or damaged cabinets.

Work With the Master Cabinet Maker

The next step is to go out into the field to work alongside the master cabinet maker. You will get the chance to learn to interact with customers and clients, and get first-hand experience on what it takes to excel at this occupation. The real world learning will allow the apprentice cabinet maker to practice installing and hanging multiple types of cabinets.

The apprentice cabinet maker will get a chance to accurately learn what it is like to be a master cabinet maker. The work the apprentice does with the master cabinet maker will be paid work. Money always helps when starting out in the world!

Attending an RTO

RTO stands for registered trade organisation, and this is where the soon to be cabinet maker will receive off the job training. Training requirements are decided on with the master cabinet maker. The novice will complete their training through the RTO. Training is completed when all requirements are met.

Cabinet making is a great profession to learn and one that is timeless.